72camaro
Well-Known Member
running an orion hcca 122 sub specs are
Power(RMS/Peak)2000 Watts/4000 Watts
Fs (Hz)35
Qts0.53
Vas (cu ft)0.85
Mounting Hole Diameter (Inches)11.9
Mounting Depth (Inches)10.7
Sensitivity84dB
and a power acoustik D1-6000D amp specs are
RMS Power Rating:
4 ohms: 2,000 watts x 1 chan.
2 ohms: 2,800 watts x 1 chan.
1 ohm: 3,500 watts x 1 chan.
Max power output: 6,000 watts x 1 chan.
Low level: 100mV-2V
High level: 2V-8V
Variable low-pass filter (50-150 Hz)
Subsonic filter (10-40 Hz)
Phase Shift: 0-180°
Damping factor: >180
Frequency response: 50-150 Hz
running it at 1ohm here is a pic of all the gains and controls for adjusting the amp any help on where to set the different gains and control switches for the absolute max power i can pull out of this setup would be great, sub is in a single 12'' vented box hope ive given enough info if not do ask, just looking to get it tuned with out going out and paying an audio shop to do and im sure theres gotta be somebody on the forum thats good with audio systems thanks
Power(RMS/Peak)2000 Watts/4000 Watts
Fs (Hz)35
Qts0.53
Vas (cu ft)0.85
Mounting Hole Diameter (Inches)11.9
Mounting Depth (Inches)10.7
Sensitivity84dB
and a power acoustik D1-6000D amp specs are
RMS Power Rating:
4 ohms: 2,000 watts x 1 chan.
2 ohms: 2,800 watts x 1 chan.
1 ohm: 3,500 watts x 1 chan.
Max power output: 6,000 watts x 1 chan.
Low level: 100mV-2V
High level: 2V-8V
Variable low-pass filter (50-150 Hz)
Subsonic filter (10-40 Hz)
Phase Shift: 0-180°
Damping factor: >180
Frequency response: 50-150 Hz
running it at 1ohm here is a pic of all the gains and controls for adjusting the amp any help on where to set the different gains and control switches for the absolute max power i can pull out of this setup would be great, sub is in a single 12'' vented box hope ive given enough info if not do ask, just looking to get it tuned with out going out and paying an audio shop to do and im sure theres gotta be somebody on the forum thats good with audio systems thanks
