6-29 RKC monday night meet - Page 2

Blownsvt · 06-30-2009, 07:54 PM

Quote:

Originally Posted by svtjlp

wheres them vids at john?

it'll take a little time for editing.

93z28joel · 06-30-2009, 08:02 PM

Quote:

Originally Posted by z28punk

there are 3 correct spellings here..... who can tell me the right one?:rolleyes:

Quote:

Originally Posted by 1badburb

fuck man!!!GET IT STRAIGHT!!!!

you did the second time

on a side note... i've been working 14+ hr days at work since last monday. didn't even have the weekend off. project has got me busier then shit! but its all done today and now i can relax! i have the next week off so its time to chill and work on the truck and vette!
Aj

redcobravert · 06-30-2009, 08:23 PM

should be some good vids

Blownsvt · 06-30-2009, 08:34 PM

hopefully they will be.

**Kaiyin** · 06-30-2009, 10:55 PM

Quote:

Originally Posted by TooFast3800

Anyone take pics last night? Vids?

pics are posted in the pics/vids section.

Quote:

Originally Posted by svtjlp

wheres them vids at john?

Should have it done tomorrow. Turned out decent. Nick, you need to start bringing your dad's camera. My old-ass p/s camera is on its last leg.

z28punk · 06-30-2009, 11:24 PM

Quote:

Originally Posted by 93z28joel

lol we are always here to help.

Blownsvt · 06-30-2009, 11:57 PM

Quote:

Originally Posted by Kaiyin

pics are posted in the pics/vids section.

Should have it done tomorrow. Turned out decent. Nick, you need to start bringing your dad's camera. My old-ass p/s camera is on its last leg.

i'll see if i can steal it for the meet on the 13th. i will be up north next monday.

Bjorne043 · 07-01-2009, 12:05 AM

Yea those lights on that Lightening were killin my eyes too when he was behind me! Amazing night though, lets make it bigger next week!!

redcobravert · 07-01-2009, 04:38 PM

any word on the vids

**Kaiyin** · 07-01-2009, 06:38 PM

rendering right now. Then I will upload it to Streetfire.

redcobravert · 07-01-2009, 06:52 PM

Hells yeah

**Kaiyin** · 07-01-2009, 07:00 PM

I finally figured out how to use the audio mixer properly.

No more clipping music anymore!

Blownsvt · 07-01-2009, 07:02 PM

sweet. thats a good turn around

**Kaiyin** · 07-01-2009, 07:28 PM

video is up.

TooFast3800 · 07-01-2009, 07:49 PM

I can't find where the pics are? Anyone got a link?

**Kaiyin** · 07-01-2009, 07:54 PM

Quote:

Originally Posted by TooFast3800

I can't find where the pics are? Anyone got a link?

pics:
http://www.ricekiller.com/forums/showthread.php?t=73350

video:
http://www.ricekiller.com/forums/showthread.php?t=73423

Black01bullitt · 07-01-2009, 08:33 PM

Quote:

Originally Posted by TooFast3800

Anyone take pics last night? Vids?

I got a couple videos, I'll try uploading them tonight when I get home from work. My internet has been really AIDS lately so idk if it'll work or not. If I can get them up, I'll post them up in this thread.

svtjlp · 07-02-2009, 06:15 AM

Quote:

Originally Posted by Kaiyin

pics:
http://www.ricekiller.com/forums/showthread.php?t=73350

video:
http://www.ricekiller.com/forums/showthread.php?t=73423

why cant i watch these???

JasonCzerak · 07-02-2009, 09:47 AM

Quote:

Originally Posted by svtjlp

why cant i watch these???

because you are not 31337 enough.... I'm not either. but if we keep making useless posts, we'll become one of them.

Nice little truck you have there. looking forward to seeing it possibly this Monday.

What kinda hp do ya have at the wheels?

Blownsvt · 07-02-2009, 12:01 PM

the video is in the kills/race area which you need 100 posts to view. Adam i can link you to streetfire.

badazzgta · 07-02-2009, 12:10 PM

Hi everyone I wanted to introduce myself to everyone my name is Nereo I did post myself on the newbies Im the guy with the 1988 Pontiac Trans Am GTA! But just wanted to say the cruise was sweet and had a good time and for sure next monday I will try to get there early to introduce myself

SSGZ06 · 07-02-2009, 01:11 PM

Quote:

Originally Posted by svtjlp

why cant i watch these???

CUZ YOUR GAY....

JK

svtjlp · 07-02-2009, 01:50 PM

i work nights so i wont be out for a while, 440 rwhp 501 tq super conservative tune, not ready to throw a rod.

but im gonna try to get out soon.

svtjlp · 07-02-2009, 01:51 PM

Quote:

Originally Posted by Blownsvt

the video is in the kills/race area which you need 100 posts to view. Adam i can link you to streetfire.

do it brotha

svtjlp · 07-02-2009, 01:52 PM

Quote:

Originally Posted by SGTZ06

CUZ YOUR GAY....

JK

they stink and i hate em wp!

**Kaiyin** · 07-02-2009, 02:00 PM

here's a direct link for you:

http://videos.streetfire.net/video/CRRA-1_692757.htm

I am free until Sunday if any you guys want some shots taken.

svtjlp · 07-02-2009, 02:06 PM

Quote:

Originally Posted by Kaiyin

here's a direct link for you:

http://videos.streetfire.net/video/CRRA-1_692757.htm

I am free until Sunday if any you guys want some shots taken.

whipple? your killin me john

kenne bell 16# thats ok makes me look better at 14# losing my ass

great job on video

svtjlp · 07-02-2009, 02:12 PM

come on guys help me get my rep up im at 10 lol

**Kaiyin** · 07-02-2009, 02:16 PM

Quote:

Originally Posted by svtjlp

whipple? your killin me john

kenne bell 16# thats ok makes me look better at 14# losing my ass

great job on video

I just realized that now.

hit up the other parts of the forum. OT is fun, but wait till you hit that 1000 mark.

SSGZ06 · 07-02-2009, 03:56 PM

Quote:

Originally Posted by svtjlp

come on guys help me get my rep up im at 10 lol

Your just a little nubblet...

redcobravert · 07-02-2009, 04:42 PM

Nubblet HAHAHA

JasonCzerak · 07-02-2009, 06:05 PM

Quote:

Originally Posted by svtjlp

i work nights so i wont be out for a while, 440 rwhp 501 tq super conservative tune, not ready to throw a rod.

but im gonna try to get out soon.

That's not bad for a svt, I've run a few that just had a pully and that's it last year. I just ended up walking by them at 90 once I got into 6th.. What else have you done?

We'll have to run em soon. Working to get my truck dialed in. New (fixed) exhaust housing is here and I'm planning on pulling the turbo tonight. Might show up at university since it's a 3 day holiday weekend for most.

My sig should say somewhere close to 700hp/1400# (with a goal of 675 in the power band) in the coming weeks. I do plan to get to hi-tech and spin the rollers for 2-3 hours VERY SOON.

so let me do some internet racing math. I'm rather close with the oil burners.

your at 4800# with driver? 440 wheel hp is about 110 in the 1/4. since I'm sure on the dig it's tractionless your 60 foots are around 2.2-2.4? your setup is around high 12's from a dig but you have no issues running with low 12 vehicles on the street (as seen in the video)?

svtjlp · 07-02-2009, 06:12 PM

i gotta lil of this lil of that.

put it this way all im waiting on is a fully forged motor to mix up some nice corvette stew.

svtjlp · 07-02-2009, 06:15 PM

if my 60s are that high i better just stay home, i shoud be aroud 1.6, 1.8 but track star is not my thing, i love canadas roads

JasonCzerak · 07-02-2009, 06:20 PM

Quote:

Originally Posted by svtjlp

i gotta lil of this lil of that.

put it this way all im waiting on is a fully forged motor to mix up some nice corvette stew.

heh. yeah the vettes do need a reality check. especially that black one.

I've pondered an auto swap and twin turbos. Jut not cost effective. 700 hp is plenty I suppose for my 6 speed truck.

Now that I'm truck paymentless, in a year a reg cab 2500 dedicated toy is a possibility. We'll see on that front. a bigger house is more likey

JasonCzerak · 07-02-2009, 06:21 PM

Quote:

Originally Posted by svtjlp

if my 60s are that high i better just stay home, i shoud be aroud 1.6, 1.8 but track star is not my thing, i love canadas roads

So you running a rather sticky tire? Should of assumed but I try not to. my experience the stock tired svt's and srt's can't hook worth a damn, even if they manage a no spin, they just are not leaving hard enough.

Blownsvt · 07-02-2009, 06:26 PM

he has 305 drag radials on the back. with the auto i would think it would 60 ft pretty decent.

**Kaiyin** · 07-02-2009, 06:27 PM

those 'Vettes are really happy my little Lexus is gone and sold.

for those who have joined since I posted this vid:

http://videos.streetfire.net/video/W...ada_684623.htm

JasonCzerak · 07-02-2009, 06:40 PM

if anyone is board. I will do the turbo swap at my house (thanks for the shop offer tho). welcome to come over and help/watch/bullshit

Say something and Ill pm an address and number.. off to UPS.

yes. I'm geeked.. finally turbo lag ends at 8psi, not 20psi.

**Kaiyin** · 07-02-2009, 06:43 PM

if you don't mind, I would love to come over and learn a thing or two about diesels (and maybe help out, but you might find that I am not very helpful).

TubbD · 07-02-2009, 06:53 PM

Quote:

Originally Posted by JasonCzerak

heh. yeah the vettes do need a reality check. especially that black one.

....*gasp*

1badburb · 07-02-2009, 10:37 PM

Quote:

Originally Posted by svtjlp

i gotta lil of this lil of that.

put it this way all im waiting on is a fully forged motor to mix up some nice corvette stew.

is that a call out my friend???

Quote:

Originally Posted by JasonCzerak

heh. yeah the vettes do need a reality check. especially that black one.

which one, the C5 or the C6... the guy with the C5 has a big mouth...

he is on some sticky tires and has some other goodies on reserve if anyone beats him. you beat him in his vette...well, then he'll go home and get his all out drag car. good luck running that BEAST!

Seems like i missed a hell of a day! too bad i had to work. Gotta pay the toys someway!
Aj

**Kaiyin** · 07-03-2009, 05:15 AM

thanks to Jason for inviting me over to his place and buying me dinner.

It was a great learning experience working on that truck. While there are similarities between cars and trucks, the differences were interesting. It was a lot of fun learning and working.

I'm going to give fair warning to the 'Vette guys. This Dodge truck may surprise you guys a bit. It definitely surprised me.

JasonCzerak · 07-03-2009, 06:38 AM

Yeah, it's a little snappier now. Forgot one freaking oil like on the bypass. it was lose (hand tight). I figure there's about 2 quarts of oil under the truck now based on the dip stick level... rust preventative I suppose right? Going to get some sleep and buy a few cans of degreaser tomorrow and hit up the self service wash.

Kaiyin, not a problem! don't mind hte extra hands here and there.. Despite the shitting bolts and nuts that needed to be cut off on the damn turbo, it was fun.

Lets see. $10 for 6 nuts from Cummins. corners getting worn. The the 13mm on the exhuast housing. one of them was stuck. a little bit from the wheel grinder, and a little from the hack saw..

then we managed to lose a head gasket.. these are MLS kinda gaskets, so I managed to make it work. We found the missing gasket once we were cleaning up and putting the last piese back to gether.. So I do have a small exhaust leak too. I'm sure that's not helping spool.

I did hook up the boost to the actuator. Dropp boost from 50 to 45 in 5th gear.. Too many cops out to see where boost sits in 6th.. If it's over 45, I'll need o pull the turbo again to adjust the gate. If I pull the turbo, I'm just going to put on that other spring loaded actuator. We'll see.

It's running good. Does get lose in 4th gear a little, but it's still slow to build boost. could just be the header leak tho.

Anywho. I'm tired.

**Stealth07C6** · 07-03-2009, 10:59 AM

Quote:

Originally Posted by 1badburb

is that a call out my friend???

which one, the C5 or the C6... the guy with the C5 has a big mouth...

he is on some sticky tires and has some other goodies on reserve if anyone beats him. you beat him in his vette...well, then he'll go home and get his all out drag car. good luck running that BEAST!

Seems like i missed a hell of a day! too bad i had to work. Gotta pay the toys someway!
Aj

I think they were talking about my slow car

JasonCzerak · 07-03-2009, 02:55 PM

I was refering to dan's slow vette.

svtjlp · 07-03-2009, 07:12 PM

Quote:

Originally Posted by 1badburb

is that a call out my friend???

which one, the C5 or the C6... the guy with the C5 has a big mouth...

he is on some sticky tires and has some other goodies on reserve if anyone beats him. you beat him in his vette...well, then he'll go home and get his all out drag car. good luck running that BEAST!

Seems like i missed a hell of a day! too bad i had to work. Gotta pay the toys someway!
Aj

yea maybe i know we need to have another bbq at your pad and im loadin up your couch this time

Blownsvt · 07-03-2009, 07:27 PM

i called dibs on that couch.

1badburb · 07-04-2009, 09:22 AM

hahahha..too funny!!!

07-02-2009, 02:12 PM	#78
svtjlp Staging... Join Date: Jun 2009 Posts: 57 My Mood:	lol come on guys help me get my rep up im at 10 lol

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-30-2009, 08:23 PM	#53
redcobravert Corvettes are slow! Join Date: Sep 2007 Location: Minnesota Posts: 2,381 Vehicle: 2003 cobra	should be some good vids

06-30-2009, 08:34 PM	#54
Blownsvt New Rich Kid on the Block Join Date: Jun 2007 Location: Kicking your ass Posts: 17,935 My Mood: Vehicle: 2003 Turbo Cobra	hopefully they will be.

07-01-2009, 12:05 AM	#58
Bjorne043 First gear! Join Date: May 2009 Location: Ramsey, MN Posts: 292 Vehicle: 1998 Pontiac Trans Am WS6	Yea those lights on that Lightening were killin my eyes too when he was behind me! Amazing night though, lets make it bigger next week!!

07-01-2009, 04:38 PM	#59
redcobravert Corvettes are slow! Join Date: Sep 2007 Location: Minnesota Posts: 2,381 Vehicle: 2003 cobra	any word on the vids

07-01-2009, 06:38 PM	#60
Kaiyin Master Chief Join Date: Jan 2007 Location: Hating on Domestics Posts: 7,350 Vehicle: 93 Civic, 03 F250	rendering right now. Then I will upload it to Streetfire.

07-01-2009, 06:52 PM	#61
redcobravert Corvettes are slow! Join Date: Sep 2007 Location: Minnesota Posts: 2,381 Vehicle: 2003 cobra	Hells yeah

07-01-2009, 07:00 PM	#62
Kaiyin Master Chief Join Date: Jan 2007 Location: Hating on Domestics Posts: 7,350 Vehicle: 93 Civic, 03 F250	I finally figured out how to use the audio mixer properly. No more clipping music anymore!

07-01-2009, 07:02 PM	#63
Blownsvt New Rich Kid on the Block Join Date: Jun 2007 Location: Kicking your ass Posts: 17,935 My Mood: Vehicle: 2003 Turbo Cobra	sweet. thats a good turn around

07-01-2009, 07:28 PM	#64
Kaiyin Master Chief Join Date: Jan 2007 Location: Hating on Domestics Posts: 7,350 Vehicle: 93 Civic, 03 F250	video is up.

07-01-2009, 07:49 PM	#65
TooFast3800 Staging... Join Date: May 2009 Location: St. Francis, MN Posts: 83 Vehicle: 1998 Pontiac Firebird	I can't find where the pics are? Anyone got a link?

07-02-2009, 12:01 PM	#70
Blownsvt New Rich Kid on the Block Join Date: Jun 2007 Location: Kicking your ass Posts: 17,935 My Mood: Vehicle: 2003 Turbo Cobra	the video is in the kills/race area which you need 100 posts to view. Adam i can link you to streetfire.

07-02-2009, 12:10 PM	#71
badazzgta Warming up the tires... Join Date: Jul 2009 Location: Twin Cities, Minnesota Posts: 6 My Mood: Vehicle: 1988 Pontiac Trans Am GTA	Hi everyone I wanted to introduce myself to everyone my name is Nereo I did post myself on the newbies Im the guy with the 1988 Pontiac Trans Am GTA! But just wanted to say the cruise was sweet and had a good time and for sure next monday I will try to get there early to introduce myself

07-02-2009, 01:50 PM	#73
svtjlp Staging... Join Date: Jun 2009 Posts: 57 My Mood:	i work nights so i wont be out for a while, 440 rwhp 501 tq super conservative tune, not ready to throw a rod. but im gonna try to get out soon.

07-02-2009, 02:00 PM	#76
Kaiyin Master Chief Join Date: Jan 2007 Location: Hating on Domestics Posts: 7,350 Vehicle: 93 Civic, 03 F250	here's a direct link for you: http://videos.streetfire.net/video/CRRA-1_692757.htm I am free until Sunday if any you guys want some shots taken.

07-02-2009, 04:42 PM	#81
redcobravert Corvettes are slow! Join Date: Sep 2007 Location: Minnesota Posts: 2,381 Vehicle: 2003 cobra	Nubblet HAHAHA

07-02-2009, 06:12 PM	#83
svtjlp Staging... Join Date: Jun 2009 Posts: 57 My Mood:	i gotta lil of this lil of that. put it this way all im waiting on is a fully forged motor to mix up some nice corvette stew.

07-02-2009, 06:15 PM	#84
svtjlp Staging... Join Date: Jun 2009 Posts: 57 My Mood:	if my 60s are that high i better just stay home, i shoud be aroud 1.6, 1.8 but track star is not my thing, i love canadas roads

07-02-2009, 06:26 PM	#87
Blownsvt New Rich Kid on the Block Join Date: Jun 2007 Location: Kicking your ass Posts: 17,935 My Mood: Vehicle: 2003 Turbo Cobra	he has 305 drag radials on the back. with the auto i would think it would 60 ft pretty decent.

07-02-2009, 06:27 PM	#88
Kaiyin Master Chief Join Date: Jan 2007 Location: Hating on Domestics Posts: 7,350 Vehicle: 93 Civic, 03 F250	those 'Vettes are really happy my little Lexus is gone and sold. for those who have joined since I posted this vid: http://videos.streetfire.net/video/W...ada_684623.htm

07-02-2009, 06:40 PM	#89
JasonCzerak Second gear! Join Date: Jun 2009 Posts: 520	if anyone is board. I will do the turbo swap at my house (thanks for the shop offer tho). welcome to come over and help/watch/bullshit Say something and Ill pm an address and number.. off to UPS. yes. I'm geeked.. finally turbo lag ends at 8psi, not 20psi.

07-02-2009, 06:43 PM	#90
Kaiyin Master Chief Join Date: Jan 2007 Location: Hating on Domestics Posts: 7,350 Vehicle: 93 Civic, 03 F250	if you don't mind, I would love to come over and learn a thing or two about diesels (and maybe help out, but you might find that I am not very helpful).

07-03-2009, 05:15 AM	#93
Kaiyin Master Chief Join Date: Jan 2007 Location: Hating on Domestics Posts: 7,350 Vehicle: 93 Civic, 03 F250	thanks to Jason for inviting me over to his place and buying me dinner. It was a great learning experience working on that truck. While there are similarities between cars and trucks, the differences were interesting. It was a lot of fun learning and working. I'm going to give fair warning to the 'Vette guys. This Dodge truck may surprise you guys a bit. It definitely surprised me.

07-03-2009, 06:38 AM	#94
JasonCzerak Second gear! Join Date: Jun 2009 Posts: 520	Yeah, it's a little snappier now. Forgot one freaking oil like on the bypass. it was lose (hand tight). I figure there's about 2 quarts of oil under the truck now based on the dip stick level... rust preventative I suppose right? Going to get some sleep and buy a few cans of degreaser tomorrow and hit up the self service wash. Kaiyin, not a problem! don't mind hte extra hands here and there.. Despite the shitting bolts and nuts that needed to be cut off on the damn turbo, it was fun. Lets see. $10 for 6 nuts from Cummins. corners getting worn. The the 13mm on the exhuast housing. one of them was stuck. a little bit from the wheel grinder, and a little from the hack saw.. then we managed to lose a head gasket.. these are MLS kinda gaskets, so I managed to make it work. We found the missing gasket once we were cleaning up and putting the last piese back to gether.. So I do have a small exhaust leak too. I'm sure that's not helping spool. I did hook up the boost to the actuator. Dropp boost from 50 to 45 in 5th gear.. Too many cops out to see where boost sits in 6th.. If it's over 45, I'll need o pull the turbo again to adjust the gate. If I pull the turbo, I'm just going to put on that other spring loaded actuator. We'll see. It's running good. Does get lose in 4th gear a little, but it's still slow to build boost. could just be the header leak tho. Anywho. I'm tired.

07-03-2009, 02:55 PM	#96
JasonCzerak Second gear! Join Date: Jun 2009 Posts: 520	I was refering to dan's slow vette.

07-03-2009, 07:27 PM	#98
Blownsvt New Rich Kid on the Block Join Date: Jun 2007 Location: Kicking your ass Posts: 17,935 My Mood: Vehicle: 2003 Turbo Cobra	i called dibs on that couch.

07-04-2009, 09:22 AM	#99
1badburb Third gear! Join Date: Oct 2007 Location: tonka Posts: 1,649 My Mood: Vehicle: 98' C5, 06 GSXR 1000, 07' E63, 96' Suburban, 06' GSXR 600	hahahha..too funny!!!